A custom transport case for the ARRI LMB 4x5 lightweight mattebox — ARRI's go-to two-stage 4x5.65 mattebox for handheld and Steadicam work. The main well is contoured around the box body so it ships face-down without anything pressing on the filter trays or the front clamp. Adjacent wells carry the 4x5.65 filter trays (clear or smoked-glass slots), the swing-away rotation pin, the side flags, the top eyebrow, and the clamp-on adapter rings (LMB-MB-19, the 114mm Universal donut, and any 80/87/95/104/110/114 clamp-ons your shop runs).Pelican Protector-class shell with retractable handle, two-wheel cart roll, automatic pressure-equalization valve, and recessed dish latches. Foam is closed-cell so it doesn't shed onto filter surfaces or into the threaded clamps. Labelled clearly for fast AC-pull during a lens swap.Designed and CNC-cut at 11555 Cantara Street in North Hollywood, California. Call 818-767-3030 to spec the LMB case for the exact accessory kit your shop carries.
Specifications
- External Dimensions
- 20.66 × 17.2 × 8.4 in
- Internal Dimensions
- 18.63 × 14.18 × 7.72 in
- Lid Depth
- 1.75 in
- Bottom Depth
- 5.87 in
- Empty Weight
- 10.58 lb
- Weight w/ Custom Foam (est.)
- 13.23 lb
- Interior Volume
- 1.18 ft³
- Construction
- Injection Molded
- Material
- Body: Polypropylene; Latch: ABS; O-Ring: Polymer; Hardware: Stainless Steel; Purge Vent: 3 Micron Hydrophobic Non-Woven
- Shell / Case Model
- Pelican 1550
- Wheels / Handle
- No
- Max Padlock Shackle
- 0.31 in
- Protection Rating
- IP67
Product details
- SKU:
- 9022-45
- Shipping:
- Calculated at Checkout
- Fits Manufacturer:
- ARRI
Will this fit my setup?
Tell us what you’re protecting and everything that travels with it. We check it against this build’s foam layout and reply with either a confirmation or the change we’d make. No obligation, and it goes to the people who cut the foam.
Got it — we’re checking your package.
We have your configuration and the exact build you were looking at. You’ll hear back with a fit confirmation or the modification we’d recommend.
My setup is different
Different body, extra accessories, an accessory that has to stay mounted, or dimensions that don’t exist yet. We modify an existing design or engineer a new one.
I need several
Repeatable foam layouts, consistent hardware, replacement foam and reorders against the same drawing. Standard practice for rental houses and studio fleets.
